| SPECIFICATION OMD-24 | |
| Range | 0 - 30 ppm, Trend up to 50 ppm |
| Accuracy | According IMO MEPC. 107(49) |
| Linearity | Up to 30 ppm better than +/- 2% |
| Display | Graphic Display |
| Power Supply | 24 V AC or DC |
| Consumption | < 5 VA |
| Alarm Points 1 + 2 | Adjustable between 1 - 15 ppm (Works adjustment 15 ppm) |
| Alarm 1 Operating Delay (for annunciator purpose) |
Adjustable between 1 - 540 ppm (Works adjustment 2 sec) |
| Alarm 2 Operating Delay (for control purposes) |
Adjustable between 1 - 10 ppm (Works adjustment 10 sec) |
| System Fault Alarm | Red LED |
| Alarm Contact Rating | Potential free 1-pole change over contacts, 3 A / 240 V |
| Alarm Indication | Red LED's |
| Output Signal | 0 - 20 mA or 4 - 20 mA, reversible ext. Load < 150 Ohm |
| Sample Water Pressure | 0,1 - 10 bar |
| Sample Flow | Approx. 0,1 - 3 l/min, depending to pressure |
| Ambient Temperature | + 1 to +55o C |
| Sample Water Temperature | + 1 to +65o C |
| Roll | Up to 45o C |
| Size (Computer Unit) | 185 mm W X 210 mm H X 65 mm D |
| Size (Measuring Cell) | 140 mm W X 160 mm H X 65 mm D |
| Degree of Protection | IP 65 |
| Weight | 5,4 Kgs |
| Pipe Connections | R 1/4 " Female |
According to regulations of IMO Resolution MEPC. 107(49)
U.S. Coast Guard approved