HERMetic Compact valves support all portable HERMetic equipment fitted with a HERMetic quick connector and represent the base for the zero-ullage reference when installed at the appropriate height. They ensure a safe and reliable operation of all portable HERMetic units certified for use in classified hazardous areas.
| HERMetic Compact Valve C1-SS-W | |
 |
1" bore ball valve with 1" male BSP pipethread. Materials: Stainless steel 316, PTFE seats |
| HERMetic Compact Valve C2-SS-BL | |
 |
2" bore ball valve made on corrosion resistant stainless steel with high Molybdenium content. The top part is designed to support HERMetic equipment with 2" quick connector. All C2-SS valves are available with 2" female thread or with DUJ multi-standart flange which fits the following standards: DIN PN 10 DN 50 DIN PN 16 DN 50 DIN PN 25 DN 50 DIN PN 40 DN 50 JIS 5K 50 JIS 10K 50 ANSI 150 lbs 2" Materials: Stainless steel ANSI 316, with minimal Mo content 2,7%, PTFE seats |
| HERMetic Compact Valve C2-SS-W | |
 |
Same valve as the HERMetic Compact Valve C2-SS-BL, except the cover which is fitted with a 1" quick-connect nipple identical the one supplied on the smaller C1-SS-W Compact Valve. This nipple matces with all HERMetic units and accessories with 1" connection. The complete cover can be removed for connection of equipment with 2" connector. the valves are available with 2" female thread or with DLU multistandard flange.
Materials: Stainless steel ANSI 316, with minimal Mo content 2,7%, PTFE seats |
| HERMetic Compact Valve C2-SS-SEC PATENDED | |
 |
Same valve as the HERMetic Compact Valve C2-SS-BL, except a doubly locked security cover which prevents any water ingress and protects against inadvertent opening. The cover is secured to the valve with a stainless steel cable. Specially designed for hazardous chemicals Materials: Stainless steel ANSI 316, with minimal Mo content 2,7%, PTFE seats |